Electrochemical copolymerization of carbazole and 3‐methylthiophene

The copolymerization of carbazole (CZ) and 3‐methylthiophene (3MeT) was successfully performed electrochemically in freshly distilled boron trifluoride diethyl etherate by direct anodic oxidation of the monomer mixtures, although the oxidation potentials of CZ and 3MeT were quite different. The electrochemical properties of the copolymers were studied with cyclic voltammetry. The influence of the applied polymerization potential on the synthesis of the copolymers was investigated. The higher potential favored the incorporation of 3MeT units into the copolymers. The insertion of 3MeT units into polycarbazole (PCZ) was helpful in improving the conductivity of PCZ. The novel copolymers had the advantages of both PCZ and poly(3‐methylthiophene), that is, good redox activity, good thermal stability, and high conductivity. The structure and morphology of the copolymers were investigated with ultraviolet–visible, infrared spectroscopy, thermal analysis, and scanning electron microscopy. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1877–1885, 2006     

基于过程控制技术对轮胎硫化过热水主管道振动问题的解决

首先介绍过程控制系统的基本概念、控制模型、质量指标，结合过程控制系统理论分析轮胎硫化过热水制造的控制过程，找出原来控制不稳定的原因，进行被控参数的改变，消除输送管道振动的问题。     

乙苯/乙烯烷基化反应中EA-8402分子筛催化剂的失活动力学研究

用内循环无梯度反应器,在593～633K范围内考察了在乙苯/乙烯进行定向烷基化反应合成对二乙苯时,EA-8402分子筛催化剂的失活行为,建立了相应的失活动力学模型: -da/dt=0.3271exp(-12.94/T)P_(EB)~(0.02)P_(E(?))~(0.383)·α这一模型可作为该反应的宏观动力学模型的补充。由失活级数d=1,按Levenspiel判据推断:其失活机理应该是不受内扩散阻力控制的平行-连串失活。     

钛酸钡陶瓷铁电临界尺寸的研究进展

钛酸钡是应用和研究最多的铁电体之一。本文从实验和理论上对钛酸钡铁电临界尺寸的研究进展进行了综述。     

基于Nutch与元搜索引擎技术的高校网络舆情监测系统研究

针对高校网络舆情监测工作的不足,结合高校舆情信息的传播特点,提出了在校园网范围内基于Nutch搜索引擎技术进行信息检索,在互联网上采用元搜索引擎技术获取相关信息的舆情监测系统构建方案。采用关键词特征库匹配方式自动进行网络舆情监测,及时准确地发现网络舆情信息;探讨了高校对于网络舆情的监测、分析、引导和反馈等环节的处理方法,从而形成完善的应对机制。     

Investigation and improvement of reversible microfluidic devices based on glass–PDMS–glass sandwich configuration

Reversibly assembled microfluidic devices are dismountable and reusable, which is useful for a number of applications such as micro- and nano-device fabrication, surface functionalization, complex cell patterning, and other biological analysis by means of spatial–temporal pattern. However, reversible microfluidic devices fabricated with current standard procedures can only be used for low-pressure applications. Assembling technology based on glass–PDMS–glass sandwich configuration provides an alternative sealing method for reversible microfluidic devices, which can drastically increase the sealing strength of reversibly adhered devices. The improvement mechanism of sealing properties of microfluidic devices based on the sandwich technique has not been fully characterized, hindering further improvement and broad use of this technique. Here, we characterize, for the first time, the effect of various parameters on the sealing strength of reversible PDMS/glass hybrid microfluidic devices, including contact area, PDMS thickness, assembling mode, and external force. To further improve the reversible sealing of glass–PDMS–glass microfluidic devices, we propose a new scheme which exploits mechanical clamping elements to reinforce the sealing strength of glass–PDMS–glass sandwich structures. Using our scheme, the glass–PDMS–glass microchips can survive a pressure up to 400 kPa, which is comparable to the irreversibly bonded PDMS microdevices. We believe that this bonding method may find use in lab-on-a-chip devices, particularly in active high-pressure-driven microfluidic devices.     

构树皮丙酮抽出物的DEAE—Sephadex分离及GC—MS分析

利用ＤＥＡＥ—Ｓｅｐｈａｄｅｘ分离柱及ＧＣ—ＭＳ对构树皮丙酮抽出物 进行了分离和分析．在丙酮抽出物中中性组分占抽出物的５９．７％，弱酸性 组分和强酸性组分分别占２５．９％和１０．３％．中性组分中不皂化物占 ８９．２％，皂化物仅占８．４％．不皂化物的成分比较复杂，所检出的主要有 甾醇和甾酮类．皂化物中亚油酸占５０％，软脂酸占２１％．弱酸性组分中 ５０％以上是脂肪酸（亚油酸和软脂酸），而没有松香酸．     

MLS4531立式辊磨的开发与研制

在研究国内外立式辊磨的基础上开发出MLS4531立式辊磨,结合工程实际优化了技术参数、研磨机构及其附属装置。在调试中对MLS4531立式辊磨的液压系统,安全装置进行了改进。     

宽带直流放大器的增益控制设计与研究

首先进行了方案论证与比较,分析各种方案的优点缺点,最后选择亚德诺半导体公司生产的低噪声增益可控集成运算放大器AD603和电流反馈型宽带运算放大器AD811等器件设计宽带直流放大器。输入级采用两级AD603级联,输出级设计通频带0~10MHz的带宽,通过单片机可以对放大器增益进行控制。该放大器具有频带宽、功率高、增益可调、带宽可选择等特点。此外,对提高直流放大器的各种性能指标提出了多种具体措施,在要求较高的系统中具有较强的实用性。     

陶瓷注射成形技术进展

陶瓷粉末注射成形是从现代粉末注射成形技术中发展起来的一项新型成形技术。本文着重论述了陶瓷注射成形发展的历史、技术特点、工艺及进展情况，并介绍了CIM的典型产品和应用领域。